Video Adaptors

Audio/Video Transmission Systems

Specifications:
Model
Transmission Frequency	2.4GHz
Channels	4
Connection	Scart
Power Supply	7.5Vdc 300mA
Dimensions	100 x 60 x 20mm
Weight	210g

This system is able to transmit a wireless audio/video signal by a SCART connection on a satellite receiver, video or DVD player to a TV. The system uses advanced wireless communication technology to deliver consistently sharp audio and video signals up to 100m away. By transmitting at a very high frequency (2.4GHz) it avoids the crowded 900MHz band used by many cordless telephones and other wireless audio/video transmitters. Its superior quality is due to wide-band FM rather than AM signal modulation. It also integrates an IR remote control extender to allow you to control the audio or video source from another room using your existing remote controller. Operating range up to 30 - 50m depending on installation.

Order Code		Each
452-470	2.4GHz Video/Audio Transmitter	30.38

Specifications:
Model	CAMRFM3
Audio Input	2 x RCA Socket (Red & White), Scart
Video Input	1 x RCA Socket (Yellow), Scart
RF Output	1 x Coaxial Socket (Channel 21-69)
RF Input	1 x Coaxial Plug
Power Supply	9Vdc 200mA
Dimensions	120 x 80 x 26mm
Weight	420g

High quality AV to RF Converter. This will convert both audio and composite video signals from a DVD player, video game system, camcorder or CCTV camera. It enables a conventional TV which is not fitted with a Scart socket to be used as a monitor. The modulator has Scart and RCA sockets for the input signal. Output via coaxial plug and socket, which allows the signal to be mixed with UHF transmission. Easy to adjust with large LED display (Channel not lost on power down).

CAMRFM3 RF Modulator and Video Enhancer (Rear)

Order Code		Each
452-460	CAMRFM3 RF Modulator and Video Enhancer	19.95

Specifications:
Model	VASMON3
Resolution	640 x 480 800 x 600 1024 x 768 1440 x 900 1280 x 1024 @ 60Hz
Formats Supported	PAL NTSC 4.43(50Hz) PAL N (3.58MHz) NTSC (3.58MHz) & SECAM NTSC PAL 4.43 (60Hz) PAL M (3.58MHz) NTSC-JAPAN
Output RGB	1 x 15 Pin 'D' female 0.7Vpp
Video Input	1 x RCA 1Vpp (75 ohm)
Power Supply	7.5Vdc 1A (adaptor Supplied)
Dimensions	130 x 85 x 25mm
Weight	145g

Download Handbook >

This Video to VGA adaptor makes it possible to connect any device which has a composite output video signal (Yellow RCA Plug) or S-Video, to a VGA computer monitor. The unit has on screen display to allow for the adjustment of resolution, frequency, hue, saturation, contrast and brightness. Supplied with 7.5Vdc power adaptor, 1.2m 3.5mm Jack lead (Audio), 1.2m RCA Video lead and 1m VGA lead.

Order Code		Each
661-915	VASMON3 Video to VGA adaptor	47.37

sales@esr.co.uk

Tel: 0845 251 4363

Fax: 0191 252 2296

Modules

Components

Kits and Modules

Home

• Place your Order here • Orders accepted subject to our Terms and Conditions •

All Prices are in Pounds Sterling and Exclude VAT