| Velleman Stereo Valve Amplifier/Chrome
Kit |
 |
|
 |
Specification Features: |
- Output power: 2 x 90Wrms music power for loads of 4 or 8
ohm
- Power bandwidth: 15Hz - 40kHz (-3dB ref. 50W)
- Frequency range: 8Hz - 80kHz (-3dB ref. 1W)
- Harmonic distortion: 0.08% (1kHz / 1W) / 0.7% (1kHz /
90W)
- Signal-to-noise ratio: > 105dB (A-weighted ref. 90W)
- Channel separation: > 75dB (ref. 90W)
- Input impedance: 34Kohm
- Input sensitivity: 1Vrms at 95W
- Damping factor: > 10 (100Hz)
|
|
Read the fully Illustrated
Assembly Manual for
K4040 |
 |
Transformer |
|
|
Case |
|
|
Dimensions |
425 x 130 x 350mm |
|
Weight |
17kg |
| |
|
| For most of us a high power valve amplifier is unaffordable. This kit changes
that, so that now everybody can enjoy that sublime "valve sound". The sound of
valves cannot be surpassed, neither by transistors nor FETs. In the development
process, special attention was given to the housing so that the expensive valves
are displayed in a visually attractive manner. The most vulnerable point of a
valve amplifier are the output transformers; that's why we use ultra-linear and
overrated output transformers (toroidal) to guarantee a rich bass response. To
extend the life of the precious valves, the amplifier has a switch-on delay so
that the high voltage is switched on when the valves are warmed up. |
| Order Code |
|
1+ |
|
| K4040 |
Velleman Stereo Valve Amplifier/Chrome Kit |
765.92 |
|
|
