Velleman Stereo Valve Amplifier/Black Kit

Clearance Lines

Company Profile

How to Order

Specification Features:

Output power: 2 x 90Wrms music power for loads of 4 or 8 ohm
Power bandwidth: 15Hz - 40kHz (-3dB ref. 50W)
Frequency range: 8Hz - 80kHz (-3dB ref. 1W)
Harmonic distortion: 0.08% (1kHz / 1W) / 0.7% (1kHz / 90W)
Signal-to-noise ratio: > 105dB (A-weighted ref. 90W)
Channel separation: > 75dB (ref. 90W)
Input impedance: 34Kohm
Input sensitivity: 1Vrms at 95W
Damping factor: > 10 (100Hz)

Read the fully Illustrated Assembly Manual for K4040B

Transformer

Case

Dimensions

425 x 130 x 350mm

Weight

17kg

For most of us a high-power valve amplifier is unaffordable. This kit changes that, so that now everybody can enjoy that sublime "valve sound". The sound of valves has never been surpassed, neither by transistors nor FETs. In the development process, special attention was given to the housing so that the expensive valves are displayed in a visually attractive manner. The most vulnerable point of a valve amplifier are the output transformers; that's the reason why we use ultra-linear and overrated output transformers (toroidal) to guarantee a rich bass response. To extend the life of the precious valves, the amplifier has a switch-on delay, so that the high voltage is switched on when the valves are warmed up.

Order Code		1+
K4040B	Velleman Stereo Valve Amplifier/Black Kit	809.94

sales@esr.co.uk

Tel: 0845 251 4363

Fax: 0191 252 2296

Kits

Components

Sound & Lighting

Velleman

Home

• Place your Order here • Orders accepted subject to our Terms and Conditions •

All Prices are in Pounds Sterling and Exclude VAT