ESR Electronic Components Ltd

Clearance Lines Company Profile How to Order
Velleman Handheld LCD Oscilloscope Velleman

Handheld LCD Oscilloscope

Specification Features:
  • True RMS or peak to peak readout
  • dB measurements
  • Markers for voltage and time
  • Auto setup function
  • DC readout with zero reference function
  • Frequency readout through markers 
  • Screen hold function
  • Adjustable trigger level
  • Trigger mode: normal, auto or single
  • Trigger edge: rising or falling
  • Waveform memory (1 location only)
  • RS232 data output to computer
  • Auto power off (can be disabled)
  • Maximum sample rate for repetitive signals: 5MHz

  • Maximum sample rate for single shot events: 0.5MHz

  • Input impedance: 1Mohm // 20pF

  • Maximum input voltage: 100Vp (AC + DC)
  • Input coupling: DC, AC and GND
  • Vertical resolution: 8 bit (6 bits displayed on LCD)
  • dB range: -73dB to +40dB
  • Linearity: 1 bit (of 8 bit data)
  • LCD: 64 x 128 pixels
  • Timebase: 2µs to 20s / div in 22 steps
  • Input sensitivity: 5mV to 20V / div in 12 steps
  • Sinewave generator: 400Hz / 1Vrms // 1Kohm (adjustable)
  • Square wave output: 400Hz 3.5Vpp
  • Power supply: 9VDC / 300mA
  • Rechargeable battery: 6 x type AA / 800mAh
  • Charging current: 90mA
  • Charging time: 14 hours

Read the fully Illustrated Assembly Manual for K7105

 PDF Download

Transformer

 

Case

 

Dimensions

130 x 230 x 43mm

Weight

kg
   
This handheld scope features options never seen in its category. It is packed with handy features which enables you to perform on-the-spot measurements quick, easy and accurate. Its high-contrast, wide viewing angle LCD screen enables operation under normal daylight conditions. All functions are accessible by means of a tactile keyboard with a pleasant touch feeling. The current operating mode is displayed on-screen. If desired, auto-setup mode takes care of all scope settings for instant visualisation of waveforms. The marker function enables you to make accurate measurements of voltage, time and frequency. Acting as a DVM, it displays True RMS, dB, peak-to-peak and DC volts. With its built-in variable gain sine generator, it allows easy service of audio equipment, etc.… Probe transient response can be adjusted using the calibration output. Finally, a RS232 port enables screen data to be sent to a PC for use in different applications. A charge circuit with indicator LED for rechargeable batteries is provided.
Order Code   1+  
K7105 Velleman Handheld LCD Oscilloscope 135.28  

 

 

sales@esr.co.uk

Tel: 0845 251 4363

Fax: 0191 252 2296

  
 

• Place your Order  here • Orders accepted subject to our Terms and Conditions •

All Prices are in Pounds Sterling and Exclude VAT