Specification Features:

• No compromise high-end design
• 4 inputs
• Exclusive, high finish, solid aluminium enclosure
• High quality ALPS volume potentiometer
• Full valve design
• Auto muting (warm up) at power on
• Highly reliable reed relay input selection
• Separate left and right input section
• Programmable level adjustment: +6dB for each input
• Regulated DC filament supply
• Output mute function
• Switchable monitor output (for tape, CDR, MD,...)
• Input sensitivity for 0dB (0.775Vrms) out: approx. 200mV / 50Kohm
• Input cross talk: < -100dB @ 0dB in
• Maximum output level: 35Vpp
• Output load impedance: 10K or higher
• Signal to noise ratio (A-weighted ref. 0dB out): 100dB
• Total harmonic distortion: <0.04% @1kHz / 47K load
• Gain: x2 or x4(+ 6dB on)
• Channel separation: 85dB @ 0dB in
• AC power: 115Vac (100V to 120V) or 230Vac (220V to 240V) 16W max
• Frequency response:
• 7Hz to 150kHz (-3dB) @ x2 gain
• 18Hz to 55kHz within 0.3dB

Transformer

Case

Dimensions

290 x 165 x 68mm

Weight

2.7Kg