Specification Features:

• 8 analogue 10 bit resolution inputs: 0…5 or 10VDC / 20kohm
• 8 analogue 8 bit resolution outputs: 0…5V or 10VDC / 47ohm
• 8 digital inputs: open collector compatible (connection to GND=0) with on board LED indication
• 8 digital open collector outputs (max. 50V/100mA) with on board LED indication
• One 10 bit PWM output: 0 to 100% open collector output (max 100mA / 40V) with on board LED indication.
• General response time: 4ms per command
• USB Port: 2.0 and 1.1 compatible (USB cable included)
• Power consumption through USB port: approx. 60mA
• Up to 8 cards can be connected to PC
• Power supply: 12Vdc / 300 mA
• PWM Frequency: 15,6 KHz
• Standard execution time: 48mS (use Microchip and K8061D.DLL drivers)
• Enhanced execution time: 21mS (use K8061_C.DLL V1.0 by RE Applications)

Transformer

Case

Dimensions (PCB)

195 x 142mm

Weight

kg

This interface board has a total of 33 input/outputs: including analogue / digital and + 1PWM output. Connection to the computer is galvanically-optically isolated, so that damage to the computer is not possible thus providing a high level of secure implementation. All communication routines are contained in a Dynamic Link Library (DLL). You may write custom Windows*. Applications in Delphi, Visual Basic, C++ Builder or most other 32-bit Windows application development tool that supports calls to a DLL. For first time interfacing and tutoring, check also our K8055 USB experimentation interface board.
* WinXp recommended for optimum compatibility
* Are registered trademarks of MICROSOFT CORP.

Additional software to up grade and improve this product is available from our download section on this website.