Frequency range:
from 0.01Hz to 2MHz
Crystal-based
stability
Outputs are galvanically
isolated from the PC
Low sine wave
distortion
Two parallel
output connectors
for waveforms
TTL-level
synchronisation
output
Stores up to
8192 of waveform
points
Standard
waveforms: sine,
square and triangle
Predefined
library waveforms
included: noise,
sweep, ...
You can create
your own waveforms
with the integrated
signal wave editor
Sweep frequency
range 0.0001Hz to
25MHz
Sweep time 1ms
to 10 hours
Noise mode
bandwidth 25MHz
Extended bode
plot option together
with PC scope
Automated wave
sequence generation,
using file or
computer RS232
input.
DLL available for custom
software development
Amplitude range: 100mVpp to
10Vpp @ 1KHz// 600ohm load / 0V
offset
Frequency setting
resolution: 0.01%
With internal 40 dB
attenuator (output divided by
100)
Direct digital wave
synthesis (DDS), stores up to
8192 of waveform points
Amplitude resolution: 0.4%
of full scale
Offset: from 0 to -5V or +5V
max. (resolution 0.4% of full
scale)
Vertical resolution: 8 bits
(0.4% of full scale)
Sample rate: 50MHz
Typical sine wave distortion
(THD): < 0.08%
Output impedance: 2 x 50ohm
Power supply: standard 9V DC
adapter, 600mA (included)
Minimum system requirements:
IBM compatible PC
Windows 95, 98, ME, (Win2000, XP or NT
possible)
SVGA display card (min. 800x600)
Mouse
A free USB port
CD ROM player
