 |
|||||||||||||||||||||||||||||
Cebek 2-Channel 12-24VDC RF Receiver |
|||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||
|
The Cebek TL-311 is a two channel 12 or 24Vdc RF remote control receiver with
relay outputs. The receiver is a PCB module which can be configured for momentary (Pressing the switch on the transmitter
operates the relay, releasing the switch the relay deactivates) or latching
action (Pressing the switch on the transmitter operates the relay, pressing
the switch again deactivates the relay). It also has a built in timer which can
be adjusted between 0.1 and 132 seconds. This transmitter uses an exclusive
single identification code. The synchronisation is done by programming the
receiver to allow it to recognize identification codes for a maximum of 5
transmitters. As the receiver's memory is FIFO, once you have synchronised 5
transmitters, the next transmitter programmed will be placed on the memory used
by the first one, an the following one will substitute the memory initially
destined to the second and so on. The TL-310 remote control receiver can be
paired with
TL-301 transmitter. This Cebek transmitter is ideal for installing in your
bespoke industrial control application. They have many uses such as garden gate
opener, roller shutter remote, garage door opener, car or vehicle immobiliser,
remote barrier control
and remote stopping or starting of plant or machinery.
|
|||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
 |
|||||
 |
 |
 |
 |
||
 |
Tel: 0191 251 4363 |
|||
|
• Orders accepted subject to our Terms and Conditions • All Prices are in Pounds Sterling and Exclude VAT |
||||
