Clearance LinesCompany ProfileWebShop

Piezo Drivers

Piezo Driver
Specifications:
Frequency Response3kHz - 20kHz
SPL (1W/1m)105dB
Impedance1000Ω@1kHz
50Ω@25kHz
ConnectionSolder Terminals
Power Rating RMS75 Watts
Dimensions65mmØ
Weight55g
Suitable Horn Flare >Horn Flare 13" x 8"
A Piezo Horn Driver ensures a perfect reproduction of the high frequencies, due to the efficiency of the piezo characteristics. Due to high internal resistance of the piezo element the amplifier is hardly loaded. No special filters are required when using this type of driver, but a suitable current limiting resistor is recommended (47Ω).
Order Code Each 
200-487Piezo Compression Driver 75 watt RMS1.66 

 

Piezo Driver
Specifications:
Frequency Response3kHz - 29kHz
SPL (1W/1m)105dB
Impedance1000Ω@1kHz
50Ω@25kHz
ConnectionSolder Terminals
Power Rating RMS80 Watts
Dimensions100mmØ
WeightKg
Suitable Horn Flare >Horn Flare 13" x 8"
A Piezo Horn Driver ensures a perfect reproduction of the high frequencies, due to the efficiency of the piezo characteristics. Due to high internal resistance of the piezo element the amplifier is hardly loaded. No special filters are required when using this type of driver, but a suitable current limiting resistor is recommended (47Ω).
Order Code Each 
200-490Piezo Compression Driver 80 watt RMS3.68 

Compression Drivers

MRD-80 Drive Unit
Specifications:
Frequency Response5000Hz - 17.5kHz
Voice Coil25.5mm
Impedance
ConnectionPush Terminals
Power Rating RMS30 Watts
Dimensions80mmØ
Weight720g
Suitable Horn Flare >Horn Flare 13" x 8"
MRD-80 is a high-range driver with standard 35mm (1 3/8 ") thread, of good quality and at a particularly favourable price, of very compact size, with high efficiency.
Order Code Each 
MRD-80Compression Driver 30 watt RMS11.95 

 

80 Watt Compression Driver
Specifications:
Frequency Response400Hz - 20kHz
Voice Coil 
Impedance
ConnectionPush Terminals
Power Rating RMS40 Watts
Dimensions100mmØ
Weight1.46Kg
Suitable Horn Flare >Horn Flare 13" x 8"
This Horn Compression Driver is designed to be fitted to a suitable horn flare with a 1⅜" screw thread. Titanium Diaphragm, Kapton Bobbin and a Copper Clad Aluminium Voice Coil. The driver must be connected via a suitable audio filter or crossover. For optimum performance and reliability the compression driver should be supported in the cabinet, to relieve the weight on the horn flare.
Order Code Each 
200-409Compression Driver 40 watt RMS21.89This Product will be Despatched by Carrier

 

Dap Audio Compression Driver 80 watt RMS
Specifications:
Frequency Response1800Hz - 20kHz
SPL106dB
Voice Coil 
Impedance
ConnectionPush Terminals
Power Rating RMS80 Watts
Dimensions110mmØ
Mounting Depth59mm
Weight1.46Kg
Suitable Horn Flare >Horn Flare 13" x 8"
Dap Audio Compression Driver, designed to be fitted to a horn flare with a 1⅜" screw thread. Titanium Diaphragm, Kapton Bobbin and a Copper Clad Aluminium Voice Coil. The driver must be connected via a suitable audio filter or crossover. For optimum performance and reliability the compression driver should be supported in the cabinet, to relieve the weight on the horn flare. Replacement Voice Coil 200-480 is available.
Order Code Each 
200-418Dap Audio Compression Driver 80 watt RMS28.01 

 

40w Compression Driver
Specifications:
Frequency Response800Hz - 20kHz
SPL94dB
Voice Coil25mm
Impedance
ConnectionSolder Terminals
Power Rating RMS40 Watts
DimensionsmmØ
Weight915g
Suitable Horn Flare >Horn Flare 13" x 8"
High quality screw on compression driver is designed to be fitted to a suitable horn flare with a 1⅜" screw thread. The compression driver must be connected via a suitable audio filter or crossover. For optimum performance and reliability the weight of the compression driver should be supported in the cabinet.
Order Code Each 
200-420Compression Driver 40 watt RMS10.38 

 

60w Screw on Compression Driver
Specifications:
Frequency Response800Hz - 20kHz
SPL94dB
Voice Coil35mm
Impedance
ConnectionSolder Terminals
Power Rating RMS60 Watts
DimensionsmmØ
Weight1.17kg
Suitable Horn Flare >Horn Flare 13" x 8"
High quality screw on compression driver is designed to be fitted to a suitable horn flare with a 1⅜" screw thread. The compression driver must be connected via a suitable crossover. For optimum performance and reliability the weight of the compression driver should be supported in the cabinet.
Order Code Each 
200-422Compression Driver 60 watt RMS14.08 

 

Compression Driver 70 watt RMS
Specifications:
Frequency Response500Hz - 20kHz
SPL94dB
Voice Coil50mm
Impedance
ConnectionPush Terminals
Power Rating RMS70 Watts
Dimensions105mmØ
Weight1.65kg
Suitable Horn Flare >Horn Flare 13" x 8"
This Horn Compression Driver is designed to be fitted to a suitable horn flare with a 1⅜" screw thread. Titanium Diaphragm, Kapton Bobbin and a Copper Clad Aluminium Voice Coil. The driver must be connected via a suitable audio filter or crossover. For optimum performance and reliability the compression driver should be supported in the cabinet, to relieve the weight on the horn flare.
Order Code Each 
200-424Compression Driver 70 watt RMS16.95 

 

60w Flange Mounting Compression Driver
Specifications:
Frequency Response800Hz - 20kHz
SPL94db
Voice Coil35mm
Impedance8Ω
ConnectionGold Plated Push
Power Rating RMS60 Watts
Fixing Centres (PCD)75.5mmØ
Dimensions110mm
Weight1kg
Suitable Horn Flare >Horn Flare 13" x 8"
A 60W Compression Driver designed to be fitted to a suitable horn flare with 4-bolt flange type fitting. This driver must be connected via a suitable crossover or protection filter.
Order Code Each 
200-426Flange Mounting Compression Driver 60W RMS11.63 

 

80w Flange Mounting Compression Driver
Specifications:
Frequency Response500Hz - 20kHz
SPL94db
Voice Coil35mm
Impedance8Ω
ConnectionGold Plated Push
Power Rating RMS80 Watts
Fixing Centres (PCD)75.5mmØ
Dimensions 
Weight1.6kg
Suitable Horn Flare >Horn Flare 13" x 8"
A 80W Compression Driver designed to be fitted to a suitable horn flare with 4-bolt flange type fitting. This driver must be connected via a suitable crossover or protection filter.
Order Code Each 
200-428Flange Mounting Compression Driver 80W RMS17.18 

 

MRD-180 Compression DriverFrequency Response Graph MRD-180
Specifications:
Frequency Response800Hz - 19kHz
Crossover Frequency1800Hz
SPL109db
Voice Coil44.4mmØ
Impedance
ConnectionPush Terminals
Power Rating RMS80 Watts
Dimensions58mm x 134mmØ
Weight2.75kg
Suitable Horn Flare >Horn Flare 13" x 8"
A Top-class Flange mounting professional driver 25mm (1") with phenomenal full range reproduction of high efficiency and linear frequency response, of compact size and yet of high power capability. Perfect in any demanding PA speaker system. The compression driver should be supported in the cabinet, to relieve the weight on the horn flare. Replacement Voice Coil 200-480 is available.
Order Code Each 
MRD-180Compression Driver 80 watt RMS57.78 

 

 

sales@esr.co.uk

Tel: 0191 251 4363

Fax: 0191 252 2296

 
 

• Place your Order  here • Orders accepted subject to our Terms and Conditions

All Prices are in Pounds Sterling and Exclude VAT